The setup is done in just a few steps 

The STIL-FIT Ergometer is ready for operation within minutes. A Start Assistant will assist you in integrating the ergometer into your Wi-Fi. The STIL-FIT Wlan Box and a LAN cable are part of the delivery.

 

As simple as it gets

  1. Download the STIL-FIT app from the App Store or the Play Store.
  2. Open the STIL-FIT App and start the Start Wizard. It will guide you through the setup. In the first step, you only need your tablet, the included STIL-FIT control box and your router to install it.
  3. Plug the control box close to the router. During the setup process, you will be asked to connect the control box to the router using the LAN cable. The router can thus give the box an IP address.
  4. After the control box is integrated into your home network, unplug the cable (unless you have selected the cable mode) and go to the ergometer with the box.
  5. Place the control box within the range of the ergometer (max. 10 meters) and connect it to the power grid.
  6. Now you need to connect to Bluetooth. To do this, go to “Connect ergometer” and start pedaling to turn on the ergometer. > Guest >settings Ergometer > Connect After successful connection, the setup is complete and you can start your workout.

STIL-FIT App download:

You have 3 setup modes to choose from

STIL-FIT Ergometer SFE-012 Einrichtungsassistent

 

1. Stand-Alone mode

You should choose standalone mode if you do not have home Wi-Fi available. Standalone mode is the base mode. The ergometer then communicates directly with our control box. This makes sense especially if no Wi-Fi signal is available. 

STIL-FIT Ergometer SFE-012 Einrichtungsassistent

 

2. LAN mode – integration with cable

You should choose this mode if you have a home Wi-Fi available and your ergometer is close to your router. You can then connect the STIL-FIT control box to your router directly with the LAN cable. The maximum distance between the control box and the ergometer is determined by the Bluetooth transmission path. Cable mode is the most stable connection and can be implemented without a password.

STIL-FIT Ergometer SFE-012 Einrichtungsassistent

 

3. Wi-Fi mode

You should choose this mode if you have a home Wi-Fi available but your ergometer is not close to your router. This means that you cannot connect the STIL-FIT control box directly to your router via a LAN cable, as the maximum distance between the control box and the ergometer is determined by the Bluetooth transmission path. You will need your Wi-Fi password.

The STIL-FIT ergometer SFE-012

Innovative and unique!

Get these features with the free STIL-FIT App for iOS and Android.

Buy now Learn more